BOOT WINDOWS XP FAST

HOW TO BOOT FAST WINDOWS XP

Follow the following steps:

1. Open notepad.exe, type "del c:\windows\prefetch\ntosboot-*.* /q" (without the quotes)

2.Save as "ntosboot.bat" in c: (drive) see images

3. After saving ntosboot.bat (BATCH file), looks like in C: DRIVE

4.From the Start menu, select "Run..." & type "gpedit.msc"

5.Go to "Computer Configuration"

 6.Double click on "Windows Settings"

7.Double click again on "scripts (startup/shutdown)"

8.Select shutdown tab then (right click properties)
see images..

9.In the new window, click "add", "Browse", locate your "ntosboot.bat" file & click "Open"

 10.Click "OK", "Apply" & "OK" once again to exit.

11.After that.. From the Start menu, select "Run..." & type "devmgmt.msc" hit Enter.

 12.Double click on "IDE ATA/ATAPI controllers"

13.Right click on "Primary IDE Channel" and select "Properties"

14.Select the "Advanced Settings" tab then on the device 0 or 1 that doesn't have 'device type' greyed out select 'none' instead of 'autodetect' & click "OK".

15.Right click on  "Secondary IDE Channel" and select "Properties"

16.Select the "Advanced Settings" tab then on the device 0 or 1 that doesn't have 'device type' greyed out select 'none' instead of 'autodetect' & click "OK"

17.Reboot your computer.
Congratulations you have done! a Good job.

Note: can't see images..on mobile.
change your Browser use opera mini for mobile.
some browers are not support to view images
please browse from your computer or laptop, tablet.
Change your browser or use updated Browser,,to view images.

Send requests on virtualdjdc@gmail.com    
 

HOW TO SOLVE MONITOR DISPLAY PROBLEM

How to Solve Monitor Display problem:

First of all You have to need a Graphic driver pack (comes with motherboard)
CD/DVD bunch of drivers software.
 
Or another way you have to need to Download the drivers pack from the help of Google.com
Second option is get help from experience person or we say IT technicians.

when you have collected bunch of drivers pack for your personal computer just install it. n Don't forget to restart your computer.
 
If u have your motherboards drivers or Drivers CD/DVD. Install it n Restart your PC.
 
Then just Do this next Steps:

Step1: Go to Desktop-right click

Step2: Then Click on Properties Option

Step3: Go to Settings Tab in Display Properties

Step4: Apply Screen Resolution in 1024x768 ratio

Step5: After that Applying Go to Advanced Tab

Step6: Advanced Tab shows like This

Step7: Go to Monitor Tab- Monitor Settings (screen refresh rate)

Step8: Change screen refresh rate 75Hertz or 85Hertz (Most Important Step)

Step9: Then Apply -Ok

Step10: If Changes not done review the Step8 .
Change Screen refresh rate (Hertz) as per your choice, Make sure to choose Higher Hertz.
It will take Changes on Monitor Display for Better Screen Result.

Tips:
1. Check VGA cable(15-pin) is not older than 2 years or not in Bad condition.

    (VGA cable connected with  CPU in back portion.)

2. If your VGA cable is older or Not in Good Condition. First you Need to change VGA cable.

3. Check VGA cable n VGA GRAPHIC CARD is not burned or Cutoff in any portion.

                              

4. Make sure your VGA graphic card is working properly or not heating.
    (It's Attached with motherboard in CPU).

5. Capacitors are in good Condition of  VGA graphic card.

                                      

                                       


Note: This solution is based on only software and tips basis not hardware basis.

if your problem is not solved,  if u perfectly done all things! the steps, 

then you have to need to contact your IT professionals.

Make sure your Monitor is in good condition.

Take Monitor and check it into your friends home PC. if same problem is found!

Change your monitor or repair it. (get advices from IT professionals).

Send requests on virtualdjdc@gmail.com

 

HOW TO CHANGE MONITOR SCREEN RESOLUTION

Steps to: Change Monitor Screen resolution

Step1: First Power ON your personal computer (PC)

Step2: Go to Desktop then Right Click-Properties.

 Step3: After that Go to Settings Tab

Step4: Change resolution as per your requirement

Step5: Click Apply and Ok.

Now U have done!

Note: Normal Screen Resolution is 1024x768 pixels.

Latest monitors are AutoAdjust Technology no need to configure..

if monitor not Display's adjusted screen,, find out the autoadjust BUTTON in Monitors Body / panel.

Or install graphic Drivers.

Send requests on virtualdjdc@gmail.com